Differences between revisions 4 and 14 (spanning 10 versions)
Revision 4 as of 2013-04-10 07:54:24
Size: 1578
Editor: dyn176252
Comment:
Revision 14 as of 2013-05-08 10:39:23
Size: 3123
Editor: dyn176172
Comment:
Deletions are marked like this. Additions are marked like this.
Line 8: Line 8:
What is this wiki about? This is the wiki for the assignment Cross section Integrating Technology DG292. Here you will find the schedule, the lecture notes/presentations and all data relevant for this assignment. '''Introduction'''
Line 10: Line 10:
The intention of this assignment is help students to integrate all relevant technologies for Industrial Design. This assignment covers all aspects of Integrating Technology, although the depth of each sub-area will be limited. It will enable the student to make experiential prototypes with both mechanical, electronic and software aspects included. The student is invited to make couplings with previous, current or future projects as inspiration for the work.
Line 12: Line 12:
It is about integrating Mechanical Design, Electronics and Software. You will end the assignment with a final experiential prototype. While building this prototype you will learn how to realize interactivity based on electro-mechanical systems. There is some freedom in proposing the means of the prototype, as long as the purpose is to embed interactivity or even intelligence. By doing this, you will learn how to add a layer of intangible experiences to hardcore technology.
Line 14: Line 14:
'''Learning objectives'''
Line 15: Line 16:
To understand the basics of Integrating Technology; to combine hardware and software; to make prototypes showing a product or system which exists in 3D and also moves; basics of programming (useful for java or C based platforms); principles of feedback; connecting sensors and actuators to an Arduino; making mechanisms which have the correct degrees of freedom (correct application of forces in relation to friction, springs, etc.); to integrate this with meaningful form and senses; to understand the role of experiential prototypes in a design project; to learn using correct terminology and appropriate notations for Integrating Technology.
Line 16: Line 18:
== Interesting starting points ==
 * RecentChanges: see where people are currently working
 * WikiSandBox: feel free to change this page and experiment with editing
 * FindPage: find some content, explore the wiki
 * HelpOnMoinWikiSyntax: quick access to wiki markup
'''Learning activities'''
Line 22: Line 20:
== How to use this site ==
A Wiki is a collaborative site, anyone can contribute and share:
'''General schedule: ([[Detailed schedule|detailed schedule]])'''
Line 25: Line 22:
 * Edit any page by pressing '''<<GetText(Edit)>>''' at the top or the bottom of the page
 * Create a link to another page with joined capitalized words (like WikiSandBox) or with {{{[[words in brackets]]}}}
 * Search for page titles or text within pages using the search box at the top of any page
 * See HelpForBeginners to get you going, HelpContents for all help pages.
 1. [[http://wiki.id.tue.nl/meche/MechanicalDesign|introducing mechanisms]]
 1. [[Adding Electronics]]
 1. intermediate challenge
 1. [[Adding Programming]]
 1. embedding and form and senses
 1. presentation of proposal for final project
 1. final report and presentation
Line 30: Line 30:
To learn more about what a WikiWikiWeb is, read about MoinMoin:WhyWikiWorks and the MoinMoin:WikiNature. '''Set-up:'''
Line 32: Line 32:
This wiki is powered by [[http://moinmo.in/|MoinMoin]].  1. theory sessions
 1. theoretical exercises
 1. practical assignments
 1. workshops
 1. final project

'''Deliverables:'''

 1. intermediate challenge
 1. final experiential demonstrator
 1. report

'''List of available reference and or background materials'''

 1. Book: The Elements of Mechanical Design, by James Skakoon, ASME Press
 1. Book: Getting Started in Electronics, by Forrest Mims, [[http://www.forrestmims.com|www.forrestmims.com]]
 1. Website: http://www.cardboardmodeling.com/ by Joep Frens
 1. Book: Getting Started with Processing, by By Casey Reas, Ben Fry, publisher [[http://shop.oreilly.com/product/0636920000570.do|O'Reilly]]
 1. Book: Getting Started with Arduino, by Massimo Banzi, publisher [[http://shop.oreilly.com/product/0636920021414.do|O'Reilly]]

'''Information assignor(s)'''

Loe Feijs, Jun Hu, Frank Delbressine, Wei Chen, Peter Peters, Matthias Funk, Joep Frens

'''Special expert (Electronics):''' Geert van den Boomen

Integrating Technology (Cross section)

Introduction

This assignment covers all aspects of Integrating Technology, although the depth of each sub-area will be limited. It will enable the student to make experiential prototypes with both mechanical, electronic and software aspects included. The student is invited to make couplings with previous, current or future projects as inspiration for the work.

You will end the assignment with a final experiential prototype. While building this prototype you will learn how to realize interactivity based on electro-mechanical systems. There is some freedom in proposing the means of the prototype, as long as the purpose is to embed interactivity or even intelligence. By doing this, you will learn how to add a layer of intangible experiences to hardcore technology.

Learning objectives

To understand the basics of Integrating Technology; to combine hardware and software; to make prototypes showing a product or system which exists in 3D and also moves; basics of programming (useful for java or C based platforms); principles of feedback; connecting sensors and actuators to an Arduino; making mechanisms which have the correct degrees of freedom (correct application of forces in relation to friction, springs, etc.); to integrate this with meaningful form and senses; to understand the role of experiential prototypes in a design project; to learn using correct terminology and appropriate notations for Integrating Technology.

Learning activities

General schedule: (detailed schedule)

  1. introducing mechanisms

  2. Adding Electronics

  3. intermediate challenge
  4. Adding Programming

  5. embedding and form and senses
  6. presentation of proposal for final project
  7. final report and presentation

Set-up:

  1. theory sessions
  2. theoretical exercises
  3. practical assignments
  4. workshops
  5. final project

Deliverables:

  1. intermediate challenge
  2. final experiential demonstrator
  3. report

List of available reference and or background materials

  1. Book: The Elements of Mechanical Design, by James Skakoon, ASME Press
  2. Book: Getting Started in Electronics, by Forrest Mims, www.forrestmims.com

  3. Website: http://www.cardboardmodeling.com/ by Joep Frens

  4. Book: Getting Started with Processing, by By Casey Reas, Ben Fry, publisher O'Reilly

  5. Book: Getting Started with Arduino, by Massimo Banzi, publisher O'Reilly

Information assignor(s)

Loe Feijs, Jun Hu, Frank Delbressine, Wei Chen, Peter Peters, Matthias Funk, Joep Frens

Special expert (Electronics): Geert van den Boomen

IntegratingTechnology: FrontPage (last edited 2013-05-13 09:55:55 by anewhope)